Are you concerned about mold developing in your vacation property? Fortunately, you can prevent this from happening.
If you own a vacation property, then you know how enjoyable it can be to spend time away from the hassles and stresses of daily life.
However, it’s also important to know that a second home typically requires as much upkeep and attention as your main residence.
Therefore, mold inspection must be at the top of your list because invasion can be both unappealing and hazardous. Mold damage is a time-consuming and expensive home repair, so adopt these essential tips.
- Eliminate Clutter
Eliminating clutter is an important step in preventing mold in your vacation property. Clutter obstructs airflow, preventing your HVAC system from circulating air.
Bear in mind that draperies and furniture that block supply cause condensation. In turn, the moisture creates the ideal condition for mold growth.
For this reason, it’s important you decrease the number of items stored in spots such as the basement. Materials in such places can grow mold, particularly if they’re made of fabric or paper.
Consider discarding papers, clothes, furniture, and other items you haven’t used in the past two years. You’ll find that the stored materials are a bad condition most of the time, so there’s no point keeping them.
Ensure you eliminate or decrease general clutter and take measures to prevent overcrowding in your closets.
- Minimize Humidity
It helps to examine your home’s moisture level to prevent the likelihood of mold development. Ideally, the humidity level should be between 30% and 50%.
A level of 60% or higher could place your property at risk for invasion of the fungi. A hygrometer helps measure your home’s humidity and you can purchase the device cheaply in most electronic and hardware stores.
You should also consider installing a dehumidifier to remove excess atmospheric moisture. You can purchase a dehumidifier for the whole house that attaches to the furnace and joins to a drain, so you don’t have to empty a tank.
If you reside in a very humid region, it’s advisable you install a whole-house system. A suitable room climate can also prevent growth in colder areas on external walls.
Therefore, it’s important to maintain appropriate humidity levels for the building and residents by adopting ventilation strategies that suit the structural conditions.
- Remove Standing Water
Look for chronic dampness or standing water that could provide an environment for mold. Ensure you check for dampness or puddles around sump pumps, hot water tanks, freezers, windows, and basement doors.
You should also examine crawl spaces for foundation leaks or ground water dampness. This is very important for mold remediation and inspection.
Standing water also produces the ideal environment for the development of dangerous fungi and bacteria, including E. coli as well as disease-bearing insects.
Furthermore, this type of water may increase the likelihood of injury to pets and children. Bear in mind that pools of water around your property could also result in mold issues.
- Repair Plumbing, Seepage, and Plumbing Leaks
Adopting this measure will prevent the accumulation of moisture and mold development. It’s important to note that leaks arise from disintegrated pipes, so you should substitute old pipes once they reveal signs of dilapidation.
Leaks from walls, roofs, or taps typically cause moisture issues, so you must fix them immediately. You might also need to perform an inspection to locate any leaks you don’t know about.
- Insulate and Ventilate Crawl Spaces and Attic
Warm and moist air will rise and accumulate in the attic, however; proper ventilation will enable it to dissipate away from the home.
Ensure you cover a dirt floor in a crawl space with plastic to prevent soil moisture from increasing your home’s humidity levels. If there’s standing water, use fans to dry it before you cover the floor.
Mold elimination services are expensive and the process is usually lengthy. Additionally, the fungi’s presence can lead to health hazards such as asthma and allergies. Nevertheless, you can avoid such services by adopting these prevention tips.
If you need assistance with mold inspection, please contact us: 905-267-8556